PIR Motion Sensor : VIPL MW790


This Motion Sensor Used For Turns On your Sanitizer Pump when any human movement detected and Turns It OFF when there is No Human Movement


SPECIFICATION:

Power Sourcing: 220 -240V/AC Detection Range: 360°
Power Frequency: 50/60Hz Detection Distance: wall: 5-15m (adjustable)
Ambient Light: <3-2000LUX (adjustable) ceiling: 1-8m (radius), adjustable
HF System: 5.8GHz CW radar, ISM band Transmission Power: <0.2mW
Time Delay: Min. 10sec±3sec Installing Height: wall 1.5-3.5m
Max.12min±1min ceiling: 2-8m
Rated Load: 1200W Power Consumption: approx 0.9W
300W Detection Motion Speed: 0.6-1.5m/s


FUNCTION:

Can identify day and night: It can work in the daytime and at night when it is adjusted on the “sun” position (max).


It can work in the ambient light less than 3LUX when it is adjusted on the “3” position (min). As for the adjustment pattern, please refer to the testing pattern.

SENS adjustable: It can be adjusted according to using location. The detection distance of low sensitivity could be only 2m and high sensitivity could be 16m which fits for large room.

Time-Delay is added continually: When it receives the second induction signals within the
first induction, it will restart to time from the moment.

Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum
time is 10sec±3sec. The maximum is 12min±1min.

​V e d a n t a    I n f r a t e c h 

                                       

PIR Motion Sensor : VIPL MW727-S


This Motion Sensor Used For Turns On your Sanitizer Pump when any human movement detected and Turns It OFF when there is No Human Movement


SPECIFICATION:

Power Sourcing: 220 -240V/AC Detection Range: 360°/180°
Power Frequency: 50/60Hz Detection Distance: wall: 5-15m (adjustable)
Ambient Light: <3-2000LUX (adjustable) ceiling: 1-8m (radius), adjustable
HF System: 5.8GHz CW radar, ISM band Transmission Power: <0.2mW
Time Delay: Min. 10sec±3sec Installing Height: wall 1.5-3.5m
Max.12min±1min ceiling: 2-8m
Rated Load: 1200W Power Consumption: approx 0.9W
300W Detection Motion Speed: 0.6-1.5m/s


FUNCTION:

Can identify day and night: It can work in the daytime and at night when it is adjusted on the “sun” position (max).


It can work in the ambient light less than 3LUX when it is adjusted on the “3” position (min). As for the adjustment pattern, please refer to the testing pattern.

SENS adjustable: It can be adjusted according to using location. The detection distance of low sensitivity could be only 2m and high sensitivity could be 16m which fits for large room.

Time-Delay is added continually: When it receives the second induction signals within the
first induction, it will restart to time from the moment.

Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum
time is 10sec±3sec. The maximum is 12min±1min.